- A +
- A
- A -
A small square injection‑molded part sent by the customer (ABS material, matte white surface). In response to the customer’s requirements, engineers at Hualang 3D quickly completed full‑size 3D data acquisition for this component and performed reverse reconstruction to generate a parametric digital model applicable for mold optimization and mass reproduction.
Physical photo and STL data display
The parts include positioning holes with diameters of only several millimeters, shallow grooves and thin‑wall reinforcing ribs. Traditional measuring tools cannot fully acquire their geometric information and tend to miss critical assembly features.
STL data diagram
Holon 3D engineers use an industrial‑grade 3D scanner in precision mode to capture all fine features of the part, including the inner walls of positioning holes, fillets of grooves and sidewall ribs. Scanning a single piece only takes 3‑5 minutes. Point cloud processing and reverse modeling are then performed, boosting the overall efficiency by more than 80% compared with conventional manual surveying and mapping.
stp data diagram
